The Multiverse Node is the first building block of the Multiverse system. Each tiny Multiverse Node is a transceiver. As a single universe transmitter, it functions in a similar plug and play manner to the SHoW DMX SHoW Baby®, but speaks the more advanced Multiverse language. As a receiver, it is the primary receiver in the Multiverse system, and can be a part of a larger multi-universe setup.
AT A GLANCE
mDMX (Multiverse SHoW IDs only)
mRDM (Multiverse SHoW IDs only)
SHoW Key Security (Multiverse SHoW IDs only)
Forward Error Correction (Multiverse SHoW IDs only)
Ultra Low Latency
User Selectable Adaptive Spread Spectrum Frequency Hopping
Adjustable Output Power
- Choice Of Broadcast Radio
- Transmit and receive on the 2.4GHz band (P/N 5903) or on the 2.4GHz or the 900MHz band (P/N 5902).
- mDMX is a form of DMX optimized for wireless broadcast that dramatically reduces data being broadcast, thereby reducing unneeded radio energy.
- Multiverse is able to broadcast RDM information without disrupting the DMX broadcast. This feature is not available even in wired RDM systems. (Not available on SHoW DMX Neo SHoW IDs.)
- SHoW Key is an additional three-digit code that can be added to the Multiverse SHoW ID that will prevent any other system set on the same SHoW ID from interfering with your system.
- Allows the Receiver to detect and correct errors that may occur in the wireless transmission of data.
- Total average system latency of 4ms.
- Adaptive Spread Spectrum Frequency Hopping identifies and masks off hopping channels that contain interference, replacing them in the hop sequence with alternate channels.
- Sometimes an application calls for the most available broadcast power, but many entertainment systems can utilize lower output power to reduce detrimental effects on other radio systems in the venue, reduce reflections, and improve performance.
User Selectable SHoW IDs
- City Theatrical has always produced wireless DMX products that allowed the user to select the optimum transmission method. Users may select full bandwidth hopping, hopping limited to a section of the spectrum (including areas of the spectrum outside of the Wi-Fi range), or adaptive hopping.
- Protocols supported: ANSI E1.11 DMX512-A; E1.20 RDM
- Compatible with all Multiverse and SHoW DMX Neo products
- User can select a single universe to receive
- A very simple user interface to set SHoW ID and universe
- RDM proxy and responder functions
- DMX 5-pin in and out/thru ports
- Rugged cast aluminum enclosure
- Antenna: Omni Broadband 900MHz/2.4GHz, 2dBi/4dBi (P/N 5902); Omni Broadband 2.4GHz, 4dBI (P/N 5903)
- Auto-selection of transmit or receive mode
- Firmware updateable via USB port
- CL2 power supply with locking connector
- Built-in auto select DMX512 termination
- Selectable display timeout and brightness level
- A hanging bracket for hanging from pipe or truss
City Theatrical Multiverse Node 2.4Ghz
- 2400 - 2480MHz
- Locking DC Jack, 5.5mm x 2.1mm barrel, center positive, 12.1mm mating depth (this power supply connector is not compatible with SHoW Baby)
- 5-Pin XLR DMX512 in and out/thru ports
- RP-SMA female antenna connector/li>
- USB Type-A port
- Input Power: 5-30VDC, 0.6W
- Max Draw: 45mA max draw at 12V
- AC Adapter Voltage: 100VAC to 240VAC 50/60Hz
- Length: 102.8mm
- Width: 60mm
- Height: 36.47mm
- Weight: 0.4Kg
- Latency: 4 ms average
- RF Sensitivity: -95dBm
- Loss of Data Behavior: Output stops
- Broadcast Power: 3.2mW, 10mW, 32mW, 100mW EIRP
- Broadcast Modes: Adaptive, Full, Low, Mid, High, Max
- DMX Burst Modes: Auto Dynamic
- FCC, IC, CE